1. The fuser is at the rear of the printer. Open the rear door and undo the two restraining straps (photo no. 1)
2. Swing the rear door down as far as possible and remove by pushing to the right and releasing the left hand side first (photo no. 2)
1.
2.
3. Move the 2 blue locking clips on the fuser to the unlocked position (photo no. 3).
4. Remove the fuser by pulling on the 2 blue handles-one each side (photo no. 4).
3.
4.
5. Carefully remove and empty the toner drip tray (photo no. 5) into a plastic bag. Failure to empty the tray before turning the printer on its side to change the rollers in tray 2 (the lower paper drawer) will allow toner to leak into the printer and cause print quality and other problems which may be expensive to have repaired..
