LaserJet 2100/2200 Fuser

Fitting Instructions

Tools required: Small flat blade screwdriver           Phillips blade screwdriver

Maintenance Kit Contents: Fuser

                                       Tray 1 pick up roller     Tray 1 separation pad

                                       Tray 2 pick up roller     Tray 2 separation pad

REMOVING AND REFITTING THE FUSER

1. To remove the fuser first remove the right hand side panel (the panel with lights and buttons) and the rear panel as shown below::

2. Undo the 3 screws and 2 (3 on the LaserJet 2200)electrical connectors as shown below, then carefully pull the fuser from the printer.